Write At Command Station V104 • Tested

The syntax of the WriteAt command is as follows:

// Read the data from EEPROM location 10 data = EEPROM.read(10); Serial.print("Data at location 10: "); Serial.println(data); write at command station v104

void loop() { // Read the data from EEPROM location 0 byte data = EEPROM.read(0); Serial.print("Data at location 0: "); Serial.println(data); The syntax of the WriteAt command is as

void setup() { // Write a byte to EEPROM location 0 EEPROM.writeAt(0, 10); Serial.print("Data at location 10: ")